Frequently Asked Questions

Get Answers to Your HVAC Concerns

“THESE FOLKS ARE THE BEST!” Very reliable and trustworthy.

– SHAN M.

- Thermostat -

WHY MY THERMOSTAT IS NOT WORKING?

A non-functional thermostat can be due to various issues, including dead batteries, incorrect settings, a tripped circuit breaker, or a malfunction within the thermostat itself or the HVAC system it controls.

When considering your Thermostat is not working, it’s a good idea to consult with a professional in air conditioning repair and heating services.

how do i fix an unresponsive thermostat?

Check the Batteries: Replace if they are dead or weak.
Inspect the Settings: Make sure it’s set correctly for your needs.
Look at the Circuit Breaker: Reset any tripped breakers.
Clean the Thermostat: Dust and debris can impair its functionality. Clean gently after turning it off.

If these steps don’t resolve the issue, it’s best to consult with an air conditioning professional.

why is my thermostat suddenly not working?

Sudden failures can be due to electrical issues, like a blown fuse or tripped breaker, wiring problems, or sudden device failure, especially in older models.

If you feel stuck with a sudden thermostat failure, seek for air conditioning repair professional help.

HOW YOU CAN TELL WHEN YOUR THERMOSTAT IS BAD?

The Heating and Air Conditioning system doesn’t start or runs continuously without reaching the set temperature.

Experiencing frequent temperature swings.

The display is blank or unresponsive.

When you suspect your thermostat might be failing, don’t wait for discomfort to grow.

Call an air conditioning repair expert now.

how do i reset my thermostat?

Manual Check: Reset procedures vary by model.
For Programmable Models: Try removing the batteries or turning off the HVAC system power for a few minutes.
For Smart Models: Look for a ‘Reset’ option in the settings.

A reset might not always fix the issue.

Encountering persistent issues with your thermostat signals a need for professional inspection. Contact an expert air conditioning repair expert for a quick resolution and ensure your home remains comfortable and efficiently managed.

- HEATING -

HOW TO MAKE A FURNACE REPAIR?

Making a furnace repair can be complex and often requires professional expertise, especially when dealing with gas or electrical components. However, for minor issues, there are some steps you can take before calling in a professional for Air Conditioning Repair or furnace services.

Remember, safety first: if you’re not comfortable performing these steps or if the issue is beyond basic troubleshooting, it’s best to contact a professional.

Check the Thermostat: Ensure it’s set to “heat” and the temperature is adjusted correctly. Sometimes, the issue might be as simple as the thermostat being set incorrectly or needing new batteries.
Inspect the Furnace Filter: A dirty filter can restrict airflow and affect furnace performance. If the filter is clogged, replace it with a new one.
Check the Power Supply: Ensure the furnace switch is turned on and that there’s no tripped circuit breaker or blown fuse in your electrical panel.
Look at the Pilot Light (for gas furnaces): If the pilot light is out, follow your manufacturer’s instructions to relight it. If you’re unsure or uncomfortable doing this, call a professional.
Clear Vents and Registers: Make sure all vents and registers are open and unblocked by furniture or rugs to allow free airflow.
Reset the Furnace: Some furnaces have a reset button that can be pressed to restart the system. This might be necessary after a power outage or if the furnace has overheated.
If these steps don’t resolve the issue, or if you encounter problems like strange noises, continuous cycling, or a lack of heat, it’s important to seek professional help. Furnace repairs can involve intricate electrical work or handling of gas lines, both of which pose significant safety risks without the proper knowledge and tools.

what to do while waiting for furnace repair?

While waiting for professional furnace repair, there are several steps you can take to ensure your safety and comfort:

Check the Thermostat: Ensure it’s set to “heat” and the temperature is set higher than the current room temperature.
Inspect the Furnace Switch and Circuit Breaker: Make sure the furnace switch is on, and check your home’s circuit breaker or fuse box for any tripped circuits or blown fuses.
Change the Air Filter: A dirty air filter can restrict airflow and cause the furnace to work inefficiently or not at all. Replace it with a new one if it looks clogged.
Keep Warm: Use alternative heat sources like electric heaters, but ensure they are placed away from flammable materials. Dress in warm layers and use blankets to stay comfortable.
Open Interior Doors: If you have a working fireplace or another heat source in one part of the house, open doors to allow heat to circulate to other areas.
Prevent Pipes from Freezing: If the temperature is extremely low, let faucets drip slightly to prevent water pipes from freezing.

Remember, these steps are temporary measures until your furnace repair service arrives.

It’s important to rely on qualified professionals for Air Conditioning Repair and furnace issues to ensure your system is safely and effectively repaired.

WHEN SHOULD YOU REPLACE A FURNACE?

You should consider replacing a furnace under the following circumstances:

Age of the Furnace: If your furnace is older than 15-20 years, it might be time to replace it. The average lifespan of a furnace is between 15 to 20 years, and older models can be less efficient and more prone to breakdowns.
Increasing Repair Costs: When the cost of repairs begins to approach 50% of the value of a new furnace, it’s more cost-effective in the long run to invest in a new unit. Frequent breakdowns are a sign that your furnace is nearing the end of its useful life.
Rising Energy Bills: An increase in your energy bills can indicate that your furnace is losing efficiency. Newer models are significantly more efficient and can reduce your heating costs.
Inconsistent Temperatures: If some rooms are too hot while others are too cold, it might be a sign that your furnace can no longer distribute air properly throughout your home.
Noise: Older furnaces can start to make strange noises as they age, such as banging, popping, rattling, or squealing. These sounds can indicate that it’s time for a replacement.
Visible Signs of Rust or Damage: Any signs of rust or damage to the furnace itself or the surrounding ductwork can indicate serious problems that might warrant a replacement.
Carbon Monoxide Presence: If you have a gas furnace, the presence of carbon monoxide is a serious safety risk. Indicators include a yellow or flickering flame (the flame should be blue), soot around the furnace, excess moisture on windows, walls, or other cold surfaces, and rusting on pipe connections. If you suspect a carbon monoxide leak, it’s crucial to address it immediately.

When considering replacing your furnace, it’s beneficial to consult with a professional in air conditioning repair and heating services.

- Air Conditioning -

why is my ac running but not cooling?

This issue can be attributed to several factors, including a dirty air filter, blocked condenser coils, or insufficient refrigerant.

First, check and replace your air filter if it’s dirty. If the problem persists, it may be time to seek professional Air Conditioning Repair services to inspect the refrigerant levels and ensure the condenser coils are clean and unobstructed.

IS IT WORTH REPAIRING AN AIR CONDITIONER?

Yes, it is often worth repairing an air conditioner, especially if the unit is less than 10 years old and the repair cost is less than half of a new unit.

However, for older systems or when facing frequent breakdowns, it might be more cost-effective to consider a replacement.

Consulting with a professional in Air Conditioning Repair can provide guidance based on the specific condition and age of your unit.

HOW DO I RESET MY AIR CONDITIONING UNIT?

To reset your air conditioning unit, locate the reset button on your outdoor compressor unit and press it.

If there’s no visible reset button, you can turn off the power to the AC at your electrical box, wait for a minute, and then turn it back on. This can sometimes clear minor technical glitches.

For persistent issues, it’s advisable to contact an Air Conditioning Repair professional to diagnose and address the problem safely.

why is my ac air conditioner not working?

There are multiple reasons why an AC unit may stop working, including thermostat issues, power problems, a tripped circuit breaker, or a malfunctioning compressor.

Begin by checking the thermostat settings and ensuring it has power.
Next, check your home’s circuit breaker.

If these steps don’t resolve the issue, it’s likely time to call for professional Air Conditioning Repair to accurately identify and fix the problem.

- Contact PG Heating & Air Today! -

A member of our team will be in touch shortly to confirm your contact details or address questions you may have.

get in touch

Reach out and let our experts assist you!

OUR LOCATION

- Alpharetta, GA
- Buford, GA
- Clermont, GA
- Cumming, GA
- Flowery Branch, GA
- Gainesville, GA
- Gillsville, GA
- Lawrenceville, GA
- Lula, GA
- Oakwood, GA
- Roswell, GA
- Sugar Hill, GA
- Suwanee, GA